Skip to main content
Climate Action

Reducing CO₂ emissions from heavy-duty vehicles

Lorries, buses and coaches are responsible for more than a quarter of GHG emissions from road transport in the EU, and for over 6% of total EU GHG emissions. Despite some improvements in fuel consumption efficiency in recent years, these emissions are still rising, mainly due to increasing road freight traffic.

To fight the climate crisis, we need to bring down CO2 emissions in this field. To do so, the Commission is proposing new targets which will raise our ambition and meet the EU’s climate and zero pollution objectives while lowering demand for fossil fuels.

Raising our ambition

In 2023, the Commission proposed a revision of the Regulation on CO2 emission standards for heavy-duty vehicles. If adopted, the proposal would introduce new, stronger CO2 emission standards for heavy-duty vehicles from 2030 onwards, and extend the scope of the Regulation to cover smaller trucks, city buses, long-distance buses and trailers.

Previous targets: 2025 -15%, 2030 -30%. New targets: 2030 -45%, 2035 -65%, 2040 -90%.

To stimulate faster deployment of zero-emission buses in cities, the Commission also proposes to make all new city buses zero-emission as of 2030.

The new targets build on those adopted in 2019, which were the first-ever EU-wide CO2 emission standards for heavy-duty vehicles.

To enter into force, the Commission’s proposal now needs to be adopted by the European Parliament and the Council of the EU.

Main benefits

If adopted, our proposal will:

hdv_icon_decrease
Decrease CO2 emissions per km from new HDV by 90% by 2040, as compared to the reference period (1 July 2019 – 30 June 2020), with intermediate targets for 2030 (45%) and 2035 (65%)
hdv_icon_neutrality
Help reach the EU's 2050 climate neutrality target and boost zero-emission mobility
hdv_icon_health
Improve air quality and health of Europeans by cutting the level of air pollutants, especially in towns and cities
hdv_icon_cost
Reduce the fuel expenditure and total cost of ownership for transport operators and all users
hdv_icon_dependency
Lower the EU’s energy dependency on imported fossil fuels, and enhance energy savings and efficiency in the transport sector
hdv_icon_industry
Provide a clear signal to industry to pursue a zero-emission pathway by investing in innovative zero-emission technologies
hdv_icon_zero
Increase the share of zero and low-emission vehicles in the market and accelerate the roll-out of recharging and refuelling infrastructure
hdv_icon_innovation
Strengthen the technological and innovation leadership of industry in the EU and create new jobs

Regulation on CO₂ emission standards for heavy-duty vehicles

Until the revision is adopted, the Regulation on CO2 emission standards for heavy-duty vehicles applies. This Regulation entered into force on 14 August 2019.

As per the Regulation, from 2025 onwards, manufacturers will have to meet the targets set for the fleet-wide average CO2 emissions of their new lorries registered in a given calendar year. Stricter targets will start applying from 2030 on.

The targets are expressed as a percentage reduction of emissions compared to the EU average in the reference period (1 July 2019–30 June 2020):

  • From 2025 onwards: 15% reduction
  • From 2030 onwards: 30% reduction

The 2025 target can be achieved using technologies that are already available on the market. The 2030 target has been assessed as part of the review of the Regulation.

As a first step, the CO2 emission standards cover large lorries, which account for over 73% of all CO2 emissions from heavy-duty vehicles.

Incentive mechanism for zero- and low-emission vehicles (ZLEV)

The Regulation includes an incentive mechanism for

  • Zero-emission vehicles (ZEV), lorries without an internal combustion engine, or with an internal combustion engine that emits less than 1gCO2 per kWhor per km;
  • Low-emission vehicles (LEV), lorries with a technically permissible maximum laden mass of more than 16t, with CO2 emissions of less than half of the average CO2 emissions of all vehicles in its group registered in the 2019 reporting period.

To incentivise the uptake of ZLEV and reward early action, a super-credits system applies from 2019 until 2024, and can be used to comply with the target in 2025. A multiplier of 2 applies for ZEV, and a multiplier between 1 and 2 applies for LEV, depending on their CO2 emissions. An overall cap of 3% is set to preserve the environmental integrity of the system.

From 2025 onwards, the super-credits system is replaced by a benchmark-based crediting system, with a benchmark set at 2%. The 2030 benchmark level will have to be set in the context of the 2022 review.

As a result, the average specific CO2 emissions of a manufacturer are adjusted downwards if the share of ZLEV in its entire new heavy-duty vehicles fleet exceeds the 2% benchmark, out of which at least 0.75 percentage points have to be vehicles subject to the CO2 targets, i.e. the largest vehicles. Each percentage point of exceedance of the benchmark will decrease the manufacturer’s average specific CO2 emissions by one percent.

In both systems, ZEV not subject to the CO2 targets are accounted in the incentive mechanism. Buses and coaches are excluded from the scheme. The ZEV not subject to the CO2 targets can contribute to a maximum of 1.5% CO2 emissions reduction.

Cost-effective achievement of targets

The Regulation includes several elements to support cost-effective implementation:

  • Banking and borrowing to take account of long production cycles, including a reward for early action, while maintaining the environmental integrity of the targets.
  • Full flexibility for manufacturers to balance emissions between the different groups of vehicles within their portfolio.
  • Vocational vehicles , such as garbage trucks and construction vehicles, are exempted due to their limited potential for cost-efficient CO2 reduction.

Governance

The following measures will ensure the effectiveness and enforcement of the targets. They are based on the experience from cars and vans :

  • Assess the robustness and representativeness of the reference CO2 emissions as a basis for calculating the EU fleet-wide emissions targets.
  • Collect, publish and monitor real-world fuel consumption data reported by manufacturers, based on mandatory standardised fuel consumption meters
  • Introduce in-service conformity tests and mandate the reporting of deviations and the introduction of a correction mechanism
  • Apply financial penalties in case of non-compliance with the CO2 targets. The level of the penalties is set to 4,250 euro per gCO2/tkm in 2025 and 6,800 euro per gCO2/tkm in 2030.

Monitoring and reporting of CO₂ emissions from heavy-duty vehicles

The following measures enable the implementation of the emission standards:

The monitoring and reporting Regulation mandates the following monitoring and reporting requirements (with data from 1 January 2019 onwards): :

  • Member States monitor and report to the Commission information on the heavy-duty vehicles registered for the first time in the Union;
  • Lorry manufacturers monitor and report to the Commission CO2 emission and fuel consumption data as determined pursuant to the certification Regulation for each new vehicle produced for the EU market. This information will be calculated using the Vehicle Energy Consumption Calculation Tool (VECTO).

The collected data on CO2 emissions and fuel consumption, together with other relevant technical information on the vehicles, including the aerodynamic drag, is made publicly available by the European Environment Agency on behalf of the Commission

The new system complements the existing EU reporting system for cars and vans.

Vehicle Energy Consumption Calculation Tool (VECTO)

VECTO is a simulation software that can be used cost-efficiently and reliably to measure the CO2 emissions and fuel consumption of heavy-duty vehicles for specific loads, fuels and mission profiles (e.g. long haul, regional delivery, urban delivery, etc.), based on input data from relevant vehicle components.

The tool has been developed by the Commission in close cooperation with stakeholders.

More information on VECTO

Documentation

Click on the + signs for more information.

Studies

Click on the + signs for more information.